Filter
Top Products
RAID Configuration
Page 5-6
2. A main menu screen will appear (Autorun feature)
3. Select the page “RAID floppy”
4. Insert a blank floppy into the A:drive
5. Click on the required driver to begin copy into the floppy
Step 4: Install O/S into RAID disk
Proceed to install Windows XP/2000/NT4.0. When installing the O/S from CD,
press <F6> so that it will request for RAID driver. Insert the floppy created earlier in
Step 3.
Step 5: Install Software utility for Windows
After the O/S has been installed, you may install the RAID driver and software. The
RAID software is a Windows-based utility with graphical user interface that
provides an easy operating tool to configure and manage RAID arrays.
1)Insert the bundled CD into the CD-ROM drive.
2)When the main menu appears, click on the RAID driver corresponding to the
RAID controller you have configured in Step 2. See driver installation in
section 6 for more details.
Note: For information on using the software utility, refer to the user guide in
the bundled CD.