Filter
Top Products
BIOS Setup
IN9 32X/IN9 32X-MAX 2-3
※ There will be no guaranty for the settings beyond specification. Any damage of
any component on this motherboard or peripherals resulting therein is not our
responsibility.
- FSB <QDR>
This item selects the external clock frequency. Due to the specification limit of the CPU you
installed, the speed you set over its standard bus speed is supported, but not guaranteed.
- Multiplier Factor
This item displays the multiplier factor for the CPU you installed.
- Estimated New CPU Clock
This item displays an estimated CPU processor speed.
- MEM <DDR2>
This item determines the DRAM frequency.
- FSB:Memory Ratio
This item selects the CPU-to-DRAM ratio.
Options: [Auto], [1:1], [5:4], [3:2], [Sync Mode].
- N/B Strap CPU As
This item sets the external hardware reset strap assigned to NB.
Leave this item at its default [By CPU] setting to set the hardware strap according to the actual
FSB rating of the processor. Select the other options if you want to circumvent the
CPU-to-DRAM ratio limitation.
Options: [By CPU], [PSB533], [PSB800], [PSB1066].
- Estimated DDR2 Data Rate
This item displays an estimated DRAM speed.
- NB PCIe X16 Clock
This item selects the PCI Express bus frequency for connector [PCIEXP1/MASTER].
- SB PCIe X16 Clock
This item selects the PCI Express bus frequency for connector [PCIEXP2/SLAVE].
- SB PCIe X8 Clock
This item selects the PCI Express bus frequency for connector [PCIEXP3].
- SPP<->MCP REF Clock
This item selects the HT reference clock frequency for MCP.