Samsung ML-3050 / Dell 1815dn MFP
7
To reach all office in the US & Canada call (800) 322 -8992
23. The chip is located on the center of the
waste hopper. Use a small flathead screwdriver
to snap off the two ultrasonic weld pins holding
the chip cover in place (Fig. 23).
25. Stick double sided tape on broken weld
area and reattach the cover (Fig. 25).
Fig. 25
Fig. 24
24. Remove the chip cover and replace the
chip (Fig. 24).
Fig. 23
Replace defective parts, add appropriate toner,
and reassemble cartridge in reverse order.