Filter
Top Products
Operator panels > 13
> Resetting the printer and clearing the buffer after printing has been cancelled.
C
HANGING
LANGUAGE
The default language used by your printer for display messages and for report printing is
English. If required, this can be changed to:
P
RINTER
MENU
SETUP
TOOL
After installing the printer driver software onto your computer, the Printer Menu Setup Tool
is then automatically installed. See “Printer drivers” on page 37. This Printer Menu Setup
Tool is used to control and change the various printer settings.
Using the Printer Menu Setup Tool
Viewing or changing the printer settings are carried out as follows:
Click on Start > All Programs > Okidata > Printer Menu Setup Tool and select the
Printer Menu Setup Tool.
NOTE
To reset the printer to the default settings of the manufacturer, the Online
button is pressed and held down while the printer is switched on with the main
power switch. The LED indicators blink when the printer has reset to the
default settings.
German Danish
French Dutch
Italian Turkish
Spanish Portuguese
Swedish Polish
Russian Greek
Finnish Czech
Hungarian Norwegian
NOTE
1. The Operator Panel Language Setup Wizard will run automatically when
you install the printer driver. Follow the instructions provided by this
utility to set your chosen language.
2. The list above is neither conclusive nor exhaustive.