4
Network Install: Hardware
Connect to the Network Port
Note: No Ethernet
®
cable is supplied with the printer. Use an Ethernet cable
with two twisted wire pairs and an RJ45 plug.
□ Turn the printer off.
□ Remove the plug from the Ethernet port (1), then connect your Ethernet cable to the port.
□ Connect the other end of the cable to the network port.
□ Turn the printer on and wait for the print server’s STATUS light (2) to stop blinking.
□ Press the TEST button (3) on the print server. The Network Information configuration sheets print.
Keep these sheets handy: they contain information you need to set up the printer on your network.