OKIPAGE 6e/6ex18
Printing Envelopes
1. Pull out the rear exit extender until it locks and lift out the
support bar. Pull down the manual feed tray and adjust the
paper guides.
2. Insert the envelope, flap down and to the left, until the printer
grips it.
3. Set envelope size and landscape orientation in your software,
then issue the print command.
R
OL 600e
Choosing Envelopes
• Always use rear output.
• No windows or metal clasps.
• Media no heavier than 28 lbs.
• Smooth even surface.
• No self-sealing flaps.
• Seams down the sides, not across the middle.
• Squared-off flaps that do not cover the print area.
6eGBrf1a.pm6 7/18/97, 5:50 PM18