Filter
Top Products
C7350/7550 User’s Guide: Windows 2000 Printer Drivers • 205
Memory: Enabling
PostScript Only
Certain options such as additional memory, the duplexer, or
additional trays may be installed in your printer.
Before using the printer, you must enter the printer driver(s) and
enable the options. You only need to do this once.
If you have additional memory in your printer, use these
instructions to update the Windows PostScript driver so that it
recognizes the additional memory:
1. Click Start → Settings → Printers.
2. Highlight the printer name. Click File. Click Properties.
3. Click the Device Settings tab.
4. Under Installable Options, click Memory Configuration,
then set the memory in the drop-down list to be the same as
that now installed in the printer, as shown in the Menu Map.
To print the Menu Map, see “Printer Settings (Menu Settings)”
on page 70.
5. Click OK. Close the Printers dialog box.
C73_2k_PS_MemoryK.tif