Filter
Top Products
Menu functions - C830 > 40
System Adjust Power Save Time
Default: 15
Select from 5/10/15/30/60/240 Minutes
(default condition indicated by *). Select by
scroll and Enter button.
Clearable Warning
Default: ONLINE
Select from: ONLINE/Job (default condition
indicated by *). Select by scroll and Enter
button. PS job only.
Auto Continue
Default: Off
Select from On/Off (default condition indicated
by *). Select by scroll and Enter button.
Manual Timeout
Default: 60
Select from Off/30 seconds/60 seconds
(default condition indicated by *). Select by
scroll and Enter button.
Wait Timeout
Default: 40
Select from Off/5/10/20/30/40/50/60/
90/120/150/180/210/240/270/300
seconds (default condition indicated by *).
Select by scroll and Enter button.
Low Toner
Default: Continue
Select action to take when toner sensor
indicates low toner. Select from Continue/
Stop (default condition indicated by *). Select
by scroll and Enter button.
Jam Rcovery
Default: On
Select from On/Off (default condition indicated
by *). Select by scroll and Enter button.
Error Report
Default: Off
Select from On/Off (default condition indicated
by *). Select by scroll and Enter button.
Print Position Adjust
Default: 0.00
Select from X Adjust/Y Adjust/ (default
condition indicated by *). Select by scroll and
Enter button. Define measurement.
Paper Black
Settings -2/-1/0/+1/+2
Default: 0
Used for fine adjustment of the black print on
paper.
Paper color
Settings -2/-1/0/+1/+2
Default: 0
Used for fine adjustment of the color print on
paper.
Trans. Black
Settings -2/-1/0/+1/+2
Default: 0
Used for fine adjustment of the black print on
transparencies.
Trans. color
Settings -2/-1/0/+1/+2
Default: 0
Used for fine adjustment of the color print on
transparencies.
SMR Setting +3/+2/+1/-1/
-2/-3/
Default: 0
To correct variations in print results caused by
temperature/humidity conditions and difference
in print density/frequency.
Change the setting when print quality is
uneven.
BG Setting +3/+2/+1/-1/
-2/-3/
Default: 0
To correct variations in print results caused by
temperature/humility conditions and difference
in print density/frequency.
Change the setting when background is dark.
ITEM ACTION EXPLANATION