Filter
Top Products
MENU FUNCTIONS > 42
USB MENU
This menu controls the operation of the printer’s USB data interface.
NETWORK MENU
This menu controls the operation of the printer’s 10Base-T/100Base-T
network interface.
USB MENU
Item Settings Explanation
VERSION 1.1 / 2.0 Selects USB version for compatibility.
SOFT RESET ENABLE / DISABLE Enables or disables the SOFT RESET
command.
NETWORK MENU
Item Settings Explanation
TCP/IP ENABLE / DISABLE Enables or disables this network protocol.
NETBEUI ENABLE / DISABLE Enables or disables this network protocol.
IP ADDRESS SET AUTO / MANUAL Specifies whether IP address allocation is
automatic (DHCP) or manually assigned.
IP ADDRESS xxx.xxx.xxx.xxx Current assigned IP address. To change,
press ENTER and use +/– keys to increment
1st octet, then press ENTER again to move
on to next octet. When 4th octet has been
set, press ENTER again to register new
address.
SUBNET MASK xxx.xxx.xxx.xxx Current assigned subnet mask. To change,
proceed as above.
GATEWAY ADDRESS xxx.xxx.xxx.xxx Current assigned gateway address. To
change, proceed as above.
INITIALIZE NIC? EXECUTE Initialises the network hardware.
WEB/IPP ENABLE / DISABLE Enables or disables Web config. facility and
Internet Printing Protocol.
TELNET ENABLE / DISABLE Enables or disables Telnet config. facility.
FTP ENABLE / DISABLE Enables or disables communication via FTP.
SNMP ENABLE / DISABLE Enables or disables SNMP protocol.
LAN NORMAL / SMALL