6
4
5
Push lock lever down towards rear.
Insert Paper
Adjust left guide for paper size. Insert a stack of paper. (max. 100 sheets, 20 lb.) Adjust the right guide gently against the paper. Make sure power is off.
Install Toner
Connect to Your Computer
Connecting to a USB Port
For Windows 98/2000 and Macintosh Computers with a USB
port. Requires USB cable.
1 Connect the USB cable to the computer’s USB port.
2 Connect the other end of the USB cable to the printer’s USB
port.
3 Go to Step 7, Install the Printer Software.
Connecting to a Parallel Port
Requires IEEE 1284-compliant bi-directional parallel cable.
1 Make sure the computer and printer are turned off.
2 Connect the parallel cable to the computer’s parallel port.
Secure the screws.
3 Connect the other end of the cable to the printer’s parallel
port. Secure it with the wire clips.
4 Go to Step 7, Install the Printer Software.
Plug the power cord into the printer and into a
grounded electrical outlet.
With label up, place left side
under tab ➊, lower into the
toner well. Close the cover.
Unwrap toner cartridge. Shake
side to side to distribute toner.
Lift out toner well cover and discard.
➊
Pulling firmly, remove
tape from bottom.