Filter
Top Products
Loading Labels or Tags
1. Lift the top cover.
2. Press the two print head releases down to unlock the print head.
3. Unwind a few labels from the roll. Labels should be wound face-in
for the best results.
4. Slide the center justified paper holders apart until the
label roll will
drop d
own between them.
5. The paper holdersare spring loaded and will automatically retract
when releas
e
d. Make sure the label holder spindles fit inside the
label roll core and the roll spins freely.
6. Lock the paper holders in place by
pressing down on the purple lock
tab on the left paper holder.
7. Place media roll in the paper tray such that the media unwinds from
the bottom
of the roll toward the front
of the printer. The label
image surface must face up as it passes under the print head.
8. Move the purple paper guides in place to fix the label position. the
y
should lightly contact the outside edges of the label backing. Make
sure the label material is routed beneath the guides.
9. Slip the free end of the media under the print head and out the front
paper exit.
10.
Lower the print head and press it down firm
ly until it locks closed
on both sides.
11. Close the top cover.
12. Wait until the ERROR LED stops blinking. Press the FEED button
to feed a label or to resum
e
printing.
8