![](http://pdfasset.owneriq.net/2/d4/2d4ad3a7-425f-44a8-a3ec-aed820f3f56f/2d4ad3a7-425f-44a8-a3ec-aed820f3f56f-bg44.png)
6868
4
When recording voice to be processed
with voice recognition, set up your
DSS recorder as follows to improve
recognition accuracy.
• Set the microphone sensitivity to
“DICTATION” (☞ P.35).
• Set the recording mode to “SP” (☞ P.35).
• Set the Variable Control Voice Actuator
(VCVA) to “OFF” (☞ P.27).
• Register/enroll your voice in the voice
recognition software using the recorder.
• Record in a relatively quiet environment.
• Have the recorder microphone 3 to 4
inches away from your chin.
• Speak normally.
• It is recommended to use the noise-
cancellation microphone, ME12, when
recording.
Dictation files recorded under the
following conditions cannot be
processed by voice recognition because
their recognition accuracy rates will be
very low.
• A conference or meeting where many
voices are recorded.
• Seminar or lecture where high-level
ambient noise tends to be recorded.
Notes on Recording For Voice Recognition
Using Voice Recognition Software (Optional)
Using Voice Recognition Software (Optional)