Filter
Top Products
15
1
Power Supply
When the recorder is not being used, turn the power off to reduce battery consumption to a
minimum. Even if the power is turned off, existing data, mode settings, and clock settings will
be maintained.
Turning On the Power
While the recorder’s power is off,
slide the POWER/HOLD switch
in the direction indicated by the
arrow.
The display will turn on, and, after
[System Check] appears, the power will
be turned on. The resume function will
bring the recorder back to the stop
position in memory before power was
turned off.
Turning Off the Power
Slide the POWER/HOLD switch in the direction
indicated by the arrow for 0.5 seconds or longer.
The display shuts off and the power will be turned off.
The resume function remembers the stop position before
the power is turned off.
If the recorder is on and stops for 10 minutes or longer (default), the display shuts off and it
goes into power save mode. You can set the time to enter power save mode from among
[5min.], [1 min.], [30min.], [1hour] and [Off] (☞ P84) To exit power save, press any button.
Power save mode
Power Supply