Filter
Top Products
12
1
Power supply
Power supply
Charging by connecting to a
computer via USB
You can charge the batteries by connecting
to a PC's USB port. When charging, be sure
to correctly place the rechargeable batteries
(supplied) into the recorder (☞ P.10).
1 Boot the PC.
2 Slide the USB connector slide
lever in the direction indicated
by the arrow to eject the USB
connector out of the recorder.
3 While pressing the
STOP
4
button, connect to the PC’s USB
port.
" For WS-560M/WS-550M:
Do not charge the primary batteries
such as alkaline or lithium batteries.
It may cause battery leakage heating
and recorder malfunction.
• When charging the battery, press
and hold the STOP 4 button until
[Please Wait] is displayed.
4 Charging is completed when
battery indication becomes to [<].
Charging time: approximately 3 hours *
* It shows the approximate time when
charging the rechargeable battery
fully from no remaining power at the
room temperature. The charging time
will be changed depending on the
remaining amount and the state of
batteries.
Notes
• The recorder cannot be charged when the
PC is not turned on. Also, it may not be
charged when the PC is in standby mode,
stop mode and sleep mode.