Filter
Top Products
Step3:
Click
Continue
, and
select the
Installation
option
Step4:
Select
the specific
device and then just
follow the
installation
instructions step by step to complete your device
driver installation and
setup.
For
further
information on driver-related issues, an online version of
the
Device Drivers Manual is
available
by accessing the following
path:
Start/Programs/Omega USB-4700 Series/
Device
Driver’s Manual
2.3 Hardware Installation
Note:
Make
sure you have installed the software driver
before you install
the
module
(please refer to
Section 2.2 Driver Installation)
After the DLL
driver installation is completed, you
can
now go on
to
install the USB-4761 module in
any
USB port
that supports the
USB 1.1/2.0 standard,
on
your
computer. It
is suggested that you refer to
the computer’s user manual or
related
documentation if you have
any
doubts. Please
follow the steps below to install the module
on your sys-
tem.
Step 1:
Touch the metal part
on the surface
of your computer to neutral-
ize
the static electricity
that
might be in your body.
Step 2:
Plug your USB module into the selected USB port. Hold the mod-
ule only by its edges
Plug the module firmly into
place.
Use
of excessive
force
must be avoided;
otherwise
the module might get damaged.
Note:
In case
you installed the
module without installing
the DLL driver first,
Windows 2000/XP
will recog-
nize your
module as an “unknown device”
after
reboot, and
will prompt
you
to provide necessary
driver. You should ignore the prompting messages
(just click
the Cancel button) and set
up the driver
according to the steps described
in Section 2.2
Driver Installation.
USB-4761 User Manual 12