Filter
Top Products
2 11
Step 8 — Attaching the Tilt-PA to the Pipe
1. Thread and tighten Tilting Pipe Adapter onto 1.5” NPT Pipe (not included).
2. Tighten Tilt Tension Nut before attaching Adapter.
Tighten Here
Step 9 — Attaching the Adapter and Display to the Pipe Adapter
3. Align the space between the
top Nuts with the grooves in the
Tilting Pipe Adapter and gently
lower the Adapter.
4. Thread the last Nylock Nuts (2)
onto the bottom two Stud Screws.
5. Securely tighten all Nylock Nuts
4.
Note: Pipe removed for clarity