Filter
Top Products
The 2GXM2 has integrated management, eliminating the cost
and space required for external management hardware.
The
iConverter management system provides comprehensive
remote configuration and performance monitoring. iConverter
management reduces operational expenditures by keeping truck
rolls to a minimum through remote provisioning, unidirectional
fault detection, trap notification and loopback capabilities.
iConverter management is available out-of-band via IP-Less
protocol using the 802.3ah OAM channel or Omnitron’s Secure
OAM channel, or in-band using SNMP or Telnet.
Management is accessed via Omnitron’s NetOutlook
®
SNMP
Network Management Software with an intuitive Graphical User
Interface, or third party SNMP software. Telnet and CLI
management interfaces are also supported, and utilize an easy
to use, menu-driven interface. The CLI interface is accessed via
a Serial Console Port, that provides local configuration and allows
for firmware updates. Additionally, the port can be connected to
a serial modem to provide an alternative remote management path.
IP-Based Management
The 2GXM2 can be managed through IP protocols, SNMPv1,
SNMPv2c, SNMPv3 and Telnet. The IP address of the 2GXM2
can be user-defined or resolved through the DHCP host on the
network. The IP protocols for management access can be
enabled or disabled individually or as a group. Access to the
management is protected by password authentication. SMNPv3
strengthens secure access to devices by a combination of
authenticating and encrypting packets over the network.
Management VLAN can also be defined to separate
management traffic from customer traffic.
802.3ah and Secure OAM Management Channels
When utilizing a Remote OAM management channel (Secure
IP-less or 802.3ah), the NID at the Customer Premises is
securely managed by its fiber link partner located at the Central
Office or Point of Presence. The management network IP
address is not available to the customer network and is isolated
by the iConverter Network Management Module (NMM) in the
19-Module Chassis at the Central Office.
A management processor on the iConverter 2GXM2 in the
19-Module Chassis isolates the encrypted management data
from the customer data and communicates with the NMM via a
separate management backplane bus. Management traffic on
the user data lines is IP-less and carried on a securely encrypted
data channel to protect the management from unauthorized
access. The chassis at the Central Office requires only a single
IP address to manage itself and all of the connected remote
chassis managed by the Remote OAM channel. This is the
ideal configuration for networks that separate secure
management traffic from the service (customer) traffic on different
networks, or when management IP addresses are at a premium.
Page 3
Description 1000BASE-X to 1000BASE-X Fiber
Media Converter and Network Interface Device
Protocols 1000BASE-X
with 10,240 bytes max. frame size
Fiber Cables Multimode: 50/125, 62.5/125, 100/140µm
Single-mode: 9/125µm
Serial Cable RS-232, 22 to 24 AWG, 12 to 50 pF/ft.
Fiber Connectors Small Form Pluggable (SFP)
Serial Connector Mini DIN-6 female,
mini DIN-6 male to DB-9 female adapter included
Controls DIP-Switches and LEDs
DC Power Plug-In Module: 1.1A @ 3.3VDC
Standalone: 8-15VDC,
0.5A @ 9VDC
DC Power Connector Plug-In: Power supplied by backplane
Standalone: 2.5mm Barrel Connector or
Field-wireable Terminal Connector
AC Power Adapter
[US]
Plug-In Module: N/A
Standalone: 100-120VAC/60Hz
0.05A @ 120VAC
AC Power Adapter
[Universal]
Plug-In Module: N/A
Standalone: 100-240VAC/50-60Hz
0.05A @ 120VAC
Dimensions Plug-In Module: W:0.85" x D:4.5" x H:2.8"
Standalone: W:3.1" x D:4.8" x H:1.0"
Wallmount: W:3.8" x D:4.8" x H:1.0"
Weight
without power adapter
Plug-In Module: 8oz.
Standalone: 1 lb.
Weight
with power adapter
Plug-In Module: N/A
Standalone: 1.5 lb.
Compliance UL, CE, FCC Class A, MEF 9, MEF 14
IP-Based Management Telnet; SNMPv1, SNMPv2c, SNMPv3
Temperature Standard Operating: 0 to 50º C
Wide Operating: -40 to 60º C
Extended Operating: -40 to 75º C
Storage: -40 to 80º C
Humidity 5% to 95% (non-condensing)
Altitude -100m to 4000m (Operational)
MTBF (Hours) Plug-In Module: 540,000
Standalone without Power Adapter: 540,000
Standalone With Power Adapter: 250,000