Filter
Top Products
800-675-8410 • 949-250-6510 • www.omnitron-systems.com • info@omnitron-systems.com • 140 Technology Dr. • Irvine, CA 92618
Trademarks are owned by their respective companies. iConverter is a registered trademark of Omnitron Systems Technology, Inc.
NetOutlook is a trademark of Omnitron Systems Technology, Inc. Specifications subject to change without notice.
©2003-2007 Omnitron Systems Technology, Inc. All rights reserved.
091-18480-004E 9/07
Management is accomplished by using a Network Management
Module (NMM) or a media converter with integrated management
(such as an iConverter 10/100M2) that provides monitoring,
remote configuration and trap notification. The management
module can be accessed via SNMP, Telnet and via a serial port.
The SNMP-based management is accomplished via Omnitron’s
intuitive, graphic-oriented NetOutlook management software or
third party SNMP management software, while the Telnet and
the serial interfaces have an easy-to-use, menu-driven interface.
Some of the real-time 4Tx parameters that can be monitored
include link and data receive status. Other parameters include
module type and model, hardware and software revisions, serial
numbers and a user-defined identifier.
The user can override the 4Tx module’s physical switch settings
by using SNMP or Telnet to remotely configure switch-selectable
parameters such as auto-negotiation, Half or Full-Duplex and
Backplane Selection.
In addition to all standard iConverter SNMP traps such as module
insertion and removal, the 4Tx modules can generate traps on
port state changes including link-up and link-down. Trap
monitoring of specific events can be selectively enabled or
disabled by the network administrator.
Configuration 19-Module 5-Module 2-Module 1-Module
AC 24VDC 48VDC AC 24VDC 48VDC AC
18-60
VDC
US AC
Universal
AC
One (1) Power Supply 8200-1 8206-1 8205-1 8220-1 8226-1 8225-1 8230-0 8235-0 8240-1 8240-2
One (1) Power Supply
w/ Dying Gasp Support
-- -- -- -- -- -- 8230-1 8235-1 8241-1 8241-2
Two (2) Power Supplies 8200-2 8206-2 8205-2 8220-2 8226-2 8225-2 -- -- 8245-111* 8245-112*
Three (3) Power Supplies 8200-3 8206-3 8205-3 -- -- -- -- -- -- --
Spare Power Supply 8200-9 8206-9 8205-9 8220-9 8226-9 8225-9 -- -- -- --
23" Rack Mounting Kit 8091-2 8091-2 8091-2 8092-2 8092-2 8092-2 -- -- -- --
Blank Module Panel 8090-0 8090-0 8090-0 8090-0 8090-0 8090-0 8090-0 8090-0 -- --
Wall-Mounting Hardware Kit -- -- -- -- -- -- 8249-0 8249-0 8249-0 8249-0
DIN-Rail Mounting Kit -- -- -- -- -- -- -- -- 8250-0 8250-0
*Please refer to the iConverter 1-Module Redundant Power Chassis data sheet for additional model numbers and ordering options.
For wide (-40 to +60º C) and extended (-40 to +75º C) temperature range chassis, contact Omnitron for details.
Model Type 4Tx
Protocols
10BASE-T, 100BASE-TX
UTP Connectors
RJ-45
Controls
UTP X-over (Port 1), BP Enable,
Auto/Man, 10/100, FDX/HDX
LED Displays
Power, 10/100 UTP Link
Dimensions
W:0.85" x D:4.5" x H:2.8"
Weight
8 oz.
Compliance
UL, CE, FCC Class A
Power Requirement
0.9 @ 3.3VDC (typical)
Temperature
Standard: 0 to 50º C
Wide: -40 to 60º C
Storage: -40 to 80º C
Humidity
5 to 95% (non-condensing)
Altitude
-100m to 4000m
MTBF (hrs)
910, 000
Model Type Connectors Distance
8480-4
RJ-45 x 4 100m
For wide temperature (-40 to 60º C) modules, add a "W" to the end of
the model number. Consult factory for other configurations and
extended temperature (-40 to +75º C) modules.