Filter
Top Products
Tactile Switch B3F 1133
Dimensions
Unit: mm (inch)
The height of the B3F-1022-G is 5±0.2 mm.
The height of the B3F-1122-G is 5±0.2 mm.
Note: Terminal numbers are not indicated on this switch. With the switch turned over so that the logo mark “OMRON” is visible on the upper part
of the rear side of the switch base, the terminal on the right of the logo mark is numbered “1” and that on the bottom right is “3.” Accordingly,
two terminals on the left side are numbered “2” and “4” respectively.
Note: Unless otherwise specified, a tolerance of ± 0.4 mm applies to all dimensions.
■ B3F-1110
Note: Terminal numbers are not indicated on this switch. With the switch turned over so that the logo mark “OMRON” is visible on the upper part
of the rear side of the switch base, the terminal on the right of the logo mark is numbered “1” and that on the bottom right is “3.” Accordingly,
two terminals on the left side are numbered “2” and “4” respectively.
■ B3F-1000/-1002/-1005/-1020*/-1022*/-1025* ■ B3F-1050/-1052/-1055
■ B3F-1100/-1102/-1105/-1120**/-1122**/-1125** ■ B3F-1150/-1052/-1055