Omron Healthcare D7E Switch User Manual


  Open as PDF
of 4
 
Certain Precautions on Specifications and Use
1. Suitability for Use. Seller shall not be responsible for conformity with any stan-
dards, codes or regulations which apply to the combination of the Product in
Buyer's application or use of the Product. At Buyer's request, Seller will pro-
vide applicable third party certification documents identifying ratings and limita-
tions of use which apply to the Product. This information by itself is not
sufficient for a complete determination of the suitability of the Product in combi-
nation with the end product, machine, system, or other application or use.
Buyer shall be solely responsible for determining appropriateness of the partic-
ular Product with respect to Buyer's application, product or system. Buyer
shall take application responsibility in all cases but the following is a non-
exhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii)Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety
equipment, and installations subject to
separate industry or government regulations.
(iii)Use in consumer products or any use in significant quantities.
(iv)Systems, machines and equipment that could present a risk to life or
property. Please know and observe all prohibitions of use applicable to this
product.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT
THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE
INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
2. Programmable Products. Seller shall not be responsible for the user's
programming of a programmable product, or any consequence thereof.
3. Performance Data. Performance data given in this publication is provided a
s a
guide for the user in determining suitability and does not constitute a warran
ty.
It may represent the result of Seller's test conditions, and the users must cor
re-
late it to actual application requirements. Actual performance is subject
to
Seller's Warranty and Limitations of Liability.
4. Change in Specifications. Product specifications and accessories may
be
changed at any time based on improvements and other reasons. It is our pra
c-
tice to change part numbers when published ratings or features are change
d,
or when significant construction changes are made. However, some specific
a-
tions of the Product may be changed without any notice. When in doubt, sp
e-
cial part numbers may be assigned to fix or establish key specifications for yo
ur
application. Please consult with your Seller representative at any time to co
n-
firm actual specifications of purchased Product.
5. Errors and Omissions. The information in this publication has been carefu
lly
checked and is believed to be accurate; however, no responsibility is assum
ed
for clerical, typographical or proofreading errors, or omissions.
6. RoHS Compliance
. Where indicated, our products currently comply, to the b
est
of our knowledge as of the date of this publication, with the requirements of t
he
European Union's Directive on the Restriction of certain Hazardous Su
b-
stances ("RoHS"), although the requirements of RoHS do not take effect u
ntil
July 2006. These requirements may be subject to change. Please consult o
ur
website for current information.
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.components.omron.com
Canada - http://www.omron.ca
Cat. No. JB301-E3-01
Printed in USA
OMRON CANADA, INC.
885 Milner Avenue
Toronto, Ontario M1B 5V8
416-286-6465
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
847-882-2288
3/05 Specifications subject to change without notice
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website
at www.components.omron.com – under the “About Us” tab, in the Legal Matters section.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
 previous