Filter
Top Products
Manual No. 25-ULPNR101-03; Feb, 2003 LPN5627 / LPR5627 Laser Fixed Mount
Scanner
Page 22
T3 Volume = Minimum
V5 Ring buzzer once at 3kHz for 200 mS
V6 Ring buzzer at 3kHz & 2kHz for 200 mS
V7 Ring buzzer at 2kHz & 3kHz for 200 mS
W0 Disable Buzzer
W1 Enable buzzer at 3kHz
W2 Enable buzzer at 3kHz with 2.5kHz interval
W3 Enable buzzer at 2kHz with 3kHz interval
W4 Buzzer duration 0.10 sec
W5 Buzzer duration 0.20 sec
W6 Buzzer duration 0.40 sec
W7 Buzzer duration 0.05 sec
W8 Buzzer duration 0.01 sec
Positive & Negative Bar Codes
V4 Positive bar codes only
V2 Both positive and negative bar codes
Setting the Trigger Function
S7 Disable the trigger function (Laser On)
S8 Enable the trigger function (Laser OFF until
the trigger is activated )
Z Activate the trigger; turns the laser ON
Selecting the Read Mode
S0 Single Read Mode (Trigger must be Enabled,
S8)
S1 Multiple Read Mode
S2 Continuous Read Mode
7H Does not allow first bar distortion
7I Allow first bar distortion
7O Normal scan
Scanner Timeout (Trigger Enabled Mode)
Y0 Laser remains ON as long as trigger is pulled
(hardware trigger only)
Y1 1 second after triggering
Y2 2 second after triggering
Y3 3 second after triggering
Y4 4 second after triggering
Y5 6 second after triggering
Y6 8 second after triggering
Y7 10 second after triggering
Redundant Decoding
X0 Read bar code once
X1 Read bar code twice before transmitting
X2 Read bar code three times before transmitting
X3 Read bar code four times before transmitting
7R Read bar code five times before transmitting
7S Read bar code six times before transmitting
Xmit Error (Trigger Enabled Mode only)
5E Do not Xmit error code
5F Xmit “BR” <CR> for bad read or no read
5G Xmit <STX> ”>” <ETX> for bad read; <STX>
“?” <ETX> for no read
5H Xmit “>” <CR> for bad read,”?” <CR> or no
read
5I Transmit “<CAN>” <CR> for bad read or no
read
5J Xmit “<CAN>”<ETX> for bad read or no read
Print Quality Adjustment
X4 For lower density, poor print (low gain)
X5 For high density, good print quality bar code
without voids (high gain)
X6 Xmit data from Low or High gain