Filter
Top Products
28
English ...
Problem: The image is outstretched when displaying 16:9
DVD.
The projector automatically detects 16:9 DVD and adjusts the aspect
ratio by digitizing to full screen with 4:3 default setting.
If the image is still outstretched, you will also need to adjust the aspect
ratio by referring to the following:
Please select 4:3 aspect ratio type on your DVD player if you are
playing a 16:9 DVD.
If you can’t select 4:3 aspect ratio type on your DVD player, please
select 4:3 aspect ratio in the on screen menu.
Problem: Image is reversed.
Select “Management” from the OSD and adjust the projection
direction. See page 24.
Problem: Lamp burns out or makes a popping sound
When the lamp reaches its end of life, it will burn out and may
make a loud popping sound. If this happens, the projector will not
turn on until the lamp module has been replaced. To replacethe
lamp, follow the procedures in the “Replacing the Lamp”. See
page 29.
Problem: LED lighting message
Message
Power LED
Temp LED Lamp LED
Green Orange
Standby State
Flashing Off Off Off
(Input power cord)
Lamp lighting On Off Off Off
Power on On Off Off Off
Power off Off On Off Off
Error (Lamp fail) Off On Off On
Error (Thermal fail) On Off On Off
Error (Fan lock fail) Off On Flashing Off
Error (Over Temp.) Off On On Off
Error
Off On Off On
(Lamp Breakdown)
Problem: Message Reminders
“Lamp may fail soon! Replacement suggested!” will be shown
about 10 seconds when lamp life is going to deplete.
“Projector Overheated. Lamp will automatically turn off soon.” will
be shown when the system temperature is over heat.
“Fan fail. Lamp will automatically turn off soon.” will be shown
when the fan is out of order.
Appendices