Filter
Top Products
18
English
4
The Projector has a multilingual On-Screen Display(OSD) menu that allows you
to make image adjustments and change a variety of settings. In computer
source, the OSD will be the “Computer OSD”. In video source, the OSD will
be the “ Video OSD”. The projector will detect the source automatically.
4
To open the OSD menu, press the “menu” button on the Remote Control or Panel
Control.
4
To select among different menus, press the” Menu” button again. Then use
to select different items and use to adjust your selection.
4
To exit the OSD, choose the “Exit Menu” and press the enter button.
4
When the OSD is displayed, press the “Freeze/CLR” button to exit the OSD.
OSD Menus
4
Brightness
Adjusting the brightness of the image.
l Press the left key to darken the image.
l Press the right key to lighten the image.
4
Contrast
The contrast controls the degree of difference between the lightest and darkest parts of the
picture. Adjusting the contrast changes the amount of black and white in the image.
l Press the left key to decrease the contrast.
l Press the right key to increase the contrast
4
Keystone Correction
Adjusts image distortion caused by tilting the projector.
4
Color Temperature
Adjusts the color temperture. The range is from 6500°K to 7700°K . The factory default is 7100°K .
With the higher temperature, the screen looks colder; with the lower temperature, the screen
looks warmer.
How to operate
Language
4
Language
You can display the multilingual OSD menu . Use the “ Up” and “ Down” key to select the
language you prefer. The menus redrew immediately.
Display