Filter
Top Products
English
22
Problem : No image appears on screen.
4
Ensure all the cables and power connections are correctly and securely
connected as described in the “Installation” section.
4
Ensure the pins of connectors are not crooked or broken.
4
Check if the projection lamp has been securely installed. Please refer to the
“Changing the lamp” section.
4
Make sure you have removed the lens cap and the projector is switched on.
Problem : Partial, scrolling or incorrectly displayed image.
4
Press the “Re-Sync” button on the Remote Control.
4
If you are using a PC:
If the resolution of your computer is higher than 1024 x 768. Follow the steps
outlined below to reset the resolution.
For Windows 3.x:
1. In the Windows Program Manager, click the “Windows Setup” icon in the
Main group.
2. Verify that your display resolution setting is less than or equal to 1024 x 768.
For Windows 95:
1. Open “My Computer” icon, the “Control Panel” folder, and then double click
the “Display” icon.
2. Select the “Setting” tab.
3. In the “Desktop Area” you will find the resolution setting. Verify that the
resolution setting is less than or equal to 1024 x 768 resolution.
If the projector is still not projecting the whole image, you will need
to also change the monitor display you are using. Refer to the following steps.
4. Follow above steps 1~2. Click on the “Advanced Properties” button.
5. Select the “Change” button under the “Monitor” tab .
6. Click on “Show all devices”. Then select “Standard monitor types” under
the “Manufactures” box ; choose the resolution mode you need under the
“Models” box.
7. Verify that the resolution setting of the monitor display is less than or equal
to 1024 x 768.
4
If you are using a Notebook PC:
1. You are required to implement above steps of resolution setting of computer
first.
2. Switch the Notebook PC display to the “external display only” or “CRT
only” mode.
4
If you are experiencing difficulty in changing resolutions or your monitor
freezes, restart all the equipment and the projector.
Troubleshooting
If you are experiencing trouble with the projector, refer to the
following. If the problem persists, please contact your local dealer or
our service center.
Appendices