Filter
Top Products
Introduction
15
ITEM LABEL DESCRIPTION SEE PAGE:
25.
Left Left arrow when connected through USB to a PC
26.
Enter
Enter key when connected through USB to a PC
27.
Power Turns the projector on or off
28.
Laser Use as on-screen pointer. DO NOT POINT IN EYES.
The remote control can only interface with a computer when connected to the computer through a
USB cable connection. The computer cable connects a computer to the projector for display pur-
poses only.
Remote Control Operating Range
The remote control uses infrared transmission to control the projector. It is not necessary to point the
remote directly at the projector. Provided you are not holding the remote perpendicular to the sides or
the rear of the projector, the remote will function well within a radius of about 10 meters (33 feet) and
30 degrees above or below the projector level.
Projector and Remote Control Buttons
The projector can be operated using the remote control or the buttons on the top of the projector. All
operations can be carried out with the remote control; however the buttons on the projector are lim-
ited in use. The following illustration shows the corresponding buttons on the remote control and on
the projector.
Some buttons on the projector have two functions. For example, item 9/12 on the projector functions
both keystone button and as the up
cursor key in OSD menus.