Filter
Top Products
Chapter 2 Hardware Installation and Removal 13
FIGURE 2-4 LEDs
▼ To Verify the Installation (Solaris OS)
1. Use the cfgadm command to verify proper HBA installation.
If the HBA is properly installed and connected, you will see output similar to that
shown in the example.
2. If an HBA adapter is shown as unconfigured or disconnected, use the cfgadm
-c configure command to configure the adapter.
% cfgadm
Ap_Id Type Receptacle Occupant Condition
c3 fc connected configured ok
c4 fc connected configured ok
pcie5 fibre/hp connected configured ok