Filter
Top Products
2
EN
KEY FEATURES - MAIN UNIT
FRONT VIEW / LCD SYMBOLS
BACK VIEW
1. Channel 1 / 2
Ch.1 or Ch.2 will appear when the related remote
nightlight sensor has been activated.
2. Alarm On Icon
Appears when the alarm is enabled.
3. AL
Appears when you are in the Alarm Display
Mode.
4. Alarm / Calendar (DD / MM)
Shows alarm time.
Shows the date in DD / MM or MM / DD format.
5. Time
HH / MM, 12 / 24 Hour, AM / PM.
6. Atomic Clock Reception Icon
Shows the strength of the reception signal.
7. Start
Start-time for the remotely controlled backlight
by nightlight with motion sensor.
8. Hourly Chime
Appears when the hourly chime is enabled.
9. Stop
Stop-time for the remotely controlled backlight
by nightlight with motion sensor.
10. Battery Low Icon
Appears when the 2 clock batteries are low.
11.Time Zone Offset / Day of the Week
Offsets the atomic time when you are in a
different US time zone.
Name of the day in 1 of 5 languages.
12. Temperature
˚C / ˚F.
13. Light Icon with Battery Low Icon
Appears when the 2 main backlight batteries are
low.
1. Wall Mount Hole
2. Table Stand
3. Battery Compartment
Uses 4 x UM-3 / AA 1.5V batteries.
4. LIGHT button
Press to activate the clock backlight for 5
seconds.
5. MODE button
Press to toggle between 3 clock displays.
Press and hold to enter Clock Setting Mode -
US time zone offset, 12- / 24-hour format, hour,
minute, year, DD / MM or MM / DD format,
month, day, day-of-the-week language and
hourly chime on / off.
6. ARROW UP and ARROW DOWN buttons
Press to increase / decrease the value of a
setting (in any setting mode).
Press and hold to activate / deactivate the atomic
clock reception (in normal Display Mode).
Press to activate / deactivate the alarm function
when the respective alarm is selected.
7. ALARM button
Press to toggle between 3 alarm displays.
Press and hold in the respective Alarm Display
Mode to enter its Setting Mode for the daily
alarm, clock Code for the remote nightlight
sensor or, the remote-controlled backlight start
and stop time.
8. ˚C / ˚F - Temperature
Slide to select between ˚C / ˚F display format.
9. RESET
Press to return all values to the default settings.
1
2
5
6
11
7
8
10
12
13
4
3
9
LIGHTMODE ALARM
C
RESET
F
LIGHT MODE ALARM
C
RESET
F
1
3
2
4
5
6
7
8
9
JMR868A_EN_R6 09/21/2004, 11:082