Oregon Scientific MSR939A Clock User Manual


 
EN
20
The default settings are:
Clock Time: 12.00 PM
Date: 1
st
January 2004
Time Offset: -8 (Pacific Time)
Alarm 1 and 2 Time: 6.00 AM
Alarm Melody: #1 with low volume
Daily Alarms: Disabled
Motion Alarm Start Time: 12.00 AM
Motion Alarm Stop Time: 6.00 AM
Motion Alarm: Disabled
Display Setting: 12hr, MM / DD, °F
WARNINGS
This product is designed to give you years of service if
handled properly. Oregon Scientific will not be
responsible for any deviations in the usage of the device
from those specified in the user instructions or any
unapproved alterations or repairs of the product.
Observe the following guidelines:
Never immerse the product in water. This can cause
electrical shock and damage the product.
Do not subject the product to extreme force, shock,
or fluctuations in temperature or humidity.
Do not tamper with the internal components.
Do not mix new and old batteries or batteries of
different types.
Do not use rechargeable batteries with this product.
Remove the batteries if storing this product for a long
period of time.
Do not scratch the LCD display.
The technical specification of this product and
contents of this user manual are subject to change
without notice. Images not drawn to scale.
TROUBLESHOOTING
NOTE
PROBLEM SYMPTOM
Clock time
is not
correctly
set.
No atomic
clock
signal
reception.
REMEDY
Place the clock far
away from PCs,
phones, and other
electronic equipment
and near a
windowsill. Wait for
at least 24 hours.
No alarm.
Alarm does
not sound.
Turn on the alarm
setting.
RMR939PA English R5 9/21/04, 2:40 PM20