Oregon Scientific PS-S01 Clock User Manual


 
8
EN
ALARM
When activated, the Beep Alarm starts quietly, then
gradually becomes louder. It shuts off after two minutes.
The LCD display lights up for the first 8 seconds.
SET ALARM
1. Press SELECT several times until the Alarm area
flashes.
2. Press and hold SELECT for 2 seconds to enter the
setting mode.
3. Select the hour and minute. Press UP or DOWN
to change the setting. Press SELECT to confirm.
4. Press SELECT again when you are finished.
SNOOZE
Press the SNOOZE/ LIGHT button the top of the unit to
temporarily disable the alarm for 8 minutes. The alarm icon
will blink while Snooze is activated.
TO TURN THE ALARM OFF OR ON
Press any button to stop the alarm.
To turn the alarm off completely (deactivate it for the next
day), press ALARM.
CALENDAR
SET DATE
Clock auto-synchronization must be deactivated before
you manually set the date. ( 7)