Oregon Scientific RM622PA Clock User Manual


 
6
EN
When the Snooze function is enabled, the Snooze
period will last 8 minutes before the alarm sounds again.
will flash coninuously on the LCD.
NOTE Pressing SNOOZE / LIGHT turns on the green
LED backlight that lasts for 5 seconds before automatically
turning off. The backlight does not turn on when any of
the other buttons are pressed.
NOTE The Snooze function will disable if the button is
pressed. The alarm time will remain activated and will
ring the following day at the same time unless you press
again to turn off the alarm.
THE PROJECTOR FUNCTION
The projector displays the time via a bright red projection
light onto a wall, ceiling, or just about any surface for
easy and convenient viewing in a darkened room. The
time projected is shown as a single line (HH:MM) in
12-hour AM/PM format.
1. To activate the projection light, press SNOOZE /
LIGHT. The projector will project the time for 5
seconds before automatically turning off.
2. To activate continuous projection, slide the
PROJECTION ON / OFF switch to ON. Note that
this function will not work unless the AC/DC adaptor
is used.
3. To deactivate continuous projection, slide the
PROJECTION ON switch to OFF.
THE ALARM FUNCTION
DISPLAYING THE ALARM TIME
By default, the second line of the unit's LCD screen
displays current month and date. To display the alarm
time instead, press
once. To show the month and date
again, press MODE.
SETTING / ACTIVATING THE ALARM TIME
1. Press and hold
for 2 seconds. The alarm hour will
flash.
2. Use
or to set the hour. To choose the setting
more quickly, press and hold
or continuously.
3. Press to confirm and save the desired hour setting.
The minutes will automatically flash.
4. Repeat steps 2 and 3 to set the minutes setting. The
alarm time has now been set and is automatically
activated. The alarm bell icon
appears to the left of
the alarm time.
5. To deactivate the alarm, press the
. The LCD no
longer displays
.
NOTE The alarm will automatically stop ringing after 2
minute. But after 8 minutes, the alarm will sound once
more unless
is pressed.
THE SNOOZE FUNCTION
While the alarm is ringing, press the SNOOZE / LIGHT
to stop the alarm sound and activate the Snooze function.