Filter
Top Products
EN
10
ACTIVATE ALARM
Press
((.)) to activate or deactivate the Alarm.
shows
in the Clock Area when the Alarm is activated.
SNOOZE ALARM
Press SNOOZE/LIGHT to silence the Alarm for
8 minutes.
If no button is pressed, the Alarm will automatically
silence after 2 minutes. It will then sound again after
8 minutes.
TEMPERATURE AND HUMIDITY
This product can display the following temperature and
humidity information:
• Current, minimum and maximum readings
•Trend line
Data is collected by the remote sensors and displayed
every 40 seconds.
SELECT TEMPERATURE UNIT
Slide the °C / °F switch into the desired location. The
switch is located in the battery compartment. The setting
for the main unit overrides the remote sensor setting.
SELECT SENSOR CHANNEL
Press CHANNEL to switch between sensors 1 - 3.
The icon shows the selected sensor.
To auto-scan between sensors, press and hold
CHANNEL for 2 seconds. Each sensor's data will be
displayed for 3 seconds. To end auto-scan, press
CHANNEL or MEM.
Indoor
Display
Designat-
ed
Display
Remote
Display
Channel 1
Kinetic-
wave
Icon
Remote
Display
Channel 2
Remote
Display
Channel 3
RMR603HGA lab test R2 1/17/04, 4:52 PM10