Filter
Top Products
10
GB
2. To change to view the preset alarm time instead of the current
time, press [SNOOZE/LIGHT] again when projection is on.
3. Adjust the projected image as below.
For continuous projection, you must connect it with power adapter.
When the power adapter is connected to the unit, the projection
will be activated and remain so by sliding on the [PROJECTION
ON
] switch.
To deactivate the feature, slide the switch back to its off position.
To increase the life-time of the projection LED, it is suggested to
slide the [ PROJECTION ON ] switch to the “off” position
during daytime.
Section V — Others
BACKLIGHT
To turn on the EL backlight of the LCD Display, press [SNOOZE/
LIGHT] to turn it on for 5 seconds.
HOW TO RESET THE UNIT
Press [RESET] to reset the settings when the unit is malfunctioning
When [RESET] is pressed, all settings will return to the default
values and memory records will be erased.
PRECAUTIONS
This unit is engineered to give you years of satisfactory service if
you handle it carefully. Here are a few precautions.
1. Do not immerse the unit in water. If you spill liquid over it, dry
it immediately with a soft, lint-free cloth.
2. Do not clean the unit with any liquid containing alcohol,
detergent, abrasive or corrosive materials. They may scratch the
plastic parts and corrode the electronic circuit.
3. Do not subject the unit to excessive force, shock, dust,
temperature or humidity, which may result in malfunction,
shorter electronic life span, damaged battery and distorted parts.
Projector Features
Feature Effect Instructions
Adjustable
Projection
Flips an image to
maintain an upright
position
Rotates the
projection 180°
Tilt swivel projection
housing to alter the
direction of projection
FOCUS
Knob
Focuses
projection
Rotate Dial D2 to focus
projection
IMAGE
ROTATION
KNOB
Dial D3 rotates
projection
Rotation of projection
allows user to place
clock in convenient
180
°
ROTATION
BUTTON
Button D1
horizontally flips
the projection
180°
RRM968PM_EN_R0 7/7/04, 11:01 AM10