Sylvania SCM2401 Computer Monitor User Manual


 
On Screen Display (OSD) Menu Mode
Press the , buttons to reset immediately.
Activate this function when white
and black colors are present in the
screen.
Restore all factory default settings except
“LANGUAGE.”
FACTORY
RESET
NOTE
If this does not improve the screen image, restore the factory default settings. If necessary, execute the
WHITE BALANCE function again. This function will be enabled only when the input signal is an analog
signal.
4:3 IN WIDE
WIDE:Switch to full scr een mode
according to input imag e signal.
4:3 :Change the input imag e signal ratio to
4:3.
POWER
INDICATOR
Use this function to set the power
indicator on the front side of the monitor
to ONor OFF.
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned on.
To select the image size of the screen.
4:3 IN WIDE WIDE
1280 x 720 60Hz
SETUP
LANGUAGE
OSD POSITION
HORIZONTAL
VERTICAL
ENGLISH
ANALOG
1280 x 720 60Hz
ANALOG
SETUP
WHITE BALANCE
POWER INDICATOR
FACTORY RESET
NO
NO
ON
50
50
9