Outback Power Systems 30VDC Network Card User Manual


  Open as PDF
of 4
 
FLEXware16 Amp Maximum 30VDC/250VAC
Rated Relay and DIN Mount Base with LED
The FLEXware Relay Assembly will activate a two-wire start generator
when wired to the AUX output of either an OutBack FX Inverter/Charger
or an OutBack Charge Controller. The assembly consists of an LED
module and a relay inserted (in one orientation) into a base. The base is
mounted onto the DIN rail of any OutBack AC industrial control panel.
Relay Features:
Rated current - 16 amps AC/DC 8 amps per terminal•
Rated voltage - 30VDC/250VAC•
Coil power draw - 400 mW•
Gold contacts for use in low power situations•
A green LED lights to show the relay energizing when proper •
voltage is applied to the relay coil connectors.
Base accommodates connections for wiring the coil, common relay •
contacts, normally open relay contacts, and normally closed relay
contacts.
LED
RELAY
BASE
FRONT VIEW
SIDE VIEW
next