Filter
Top Products
77777
Packard Bell EasyNote GN45 Disassembly Manual
7
Fig. 8 Removing the memory module.
WLAN Card
To remove the WLAN card, first remove the battery (see Battery
) and then perform the following steps:
1. Release the screws retaining the memory module slot cover (see step 1 in Memory Module
).
2. Disconnect the wireless antenna cables (red circles on Fig. 9).
Fig. 9 Removing the WLAN card.
3. Remove the two screws securing the WLAN card (yellow circles on Fig. 9).
4. Lift the card from the main board.