Packard Bell EasyNote T5 Disassembly Manual
Page 5
Removing the Battery
Perform the following steps to remove the battery:
1. Make sure to power off the EasyNote T5 first.
2. Turn the unit upside down.
3. Unlock the battery and slide it out of its place as the arrow shows in Fig. 1
Fig. 1 Removing the battery
Removing the Hard Disk Drive
To remove the hard disk drive, first remove the battery (see Removing the Battery
), then perform
the following steps:
1. Remove the screws as shown in Fig. 2
Fig. 2 Removing the Hard disk drive cover
2. Lift up the hard disk drive and disconnect it as shown in Fig. 3
M2.5x11 Black