Filter
Top Products
STILL
Bass+
Bass -
Treb-
Treb+
OSD
POSITION
POWER
CH
CH
VOL
VOL
+
-
P.M
AUTO.ADJ
DSP
AV
0
8
7
4
5
1
2
3
6
9
-
/
--
MENU
C.SYS
ZOOM
CLK
SLP
ENTER
To enter into PC mode
Adjustments in PC mode
26
Repeatedly press AV button on the remote control or SOURCE button on
the set's panel until the screen display PC, which indicates that the set is
in PC mode.
Please connect VGA input and be sure that there is VGA input signal. The
signal format should be one of the follows:
640 x 480 @60Hz
800 x 600 @60Hz
1024 x 768 @60Hz
1280 x 768 @60Hz
We recommend you to use 1024 x 768 @60Hz (4:3) or 1280 x 768 @ 60 Hz
(16:9) so that the set can obtain the best picture.
When PC signal format changes or when you switch to PC mode by AV
button, the set corrects picture automatically including frequency and
phase to obtain the best display. During the process of auto correction, all
buttons on the remote control and set's panel do not work until this
process is finished.
When the set displays some signal formats that are nonstandard and can
not adjust by itself to the best displaying status, now you can press
AUTO.ADJ button to correct the displaying again.
PC signal format
Use AUTO.ADJ button
PC