Panamax MAX 5300 Power Supply User Manual


 
150 Mitchell Blvd., San Rafael, CA 94903 • www.panamax.com2
INTRODUCTION
Your Audio/Video components are constantly
being bombarded by electromagnetic interfer-
ence (EMI) and radio frequency interference
(RFI) through their power cords. This contam-
inated power can affect A/V equipment and will
degrade the overall performance of your entire
system. Common symptoms of contaminated
power include pops, hisses, hums, visual arti-
facts, etc. Most power filtering devices will
remove some of this interference but don’t pro-
vide a real solution to the problem.
The MAX® 5300 Sophisticated Filtration
System is a Real Solution!
Outlet Banks 1 & 2:
The primary filtration system features two
banks of independently filtered outlets (4 per
bank) for A/V equipment. These outlet banks
utilize “Balanced Double L” filter circuits
which are far superior to any other design in
filtering out all forms of electromagnetic and
radio frequency interference in both common
and normal modes. Cross-contamination
between your components is also eliminated
with this design. Bank 1 is Always-On, pro-
viding continuous power for those compo-
nents that have programmable memory set-
tings. Bank 2 can be set to either Always-On
or switched with a shutdown delay.
High-Current Outlet Bank:
The unique power requirements of current
hungry components such as amplifiers and
powered subwoofers are also addressed.
These components can rapidly draw large
amounts of current to replenish their power
supply capacitors after thunderous bass notes.
Line conditioners that utilize coils (inductors)
in series with the AC power line can “choke”
off this large inrush current, thereby reducing
the amplifiers’ ability to operate at peak per-
formance levels, resulting in a flat, dead
sound. The MAX® 5300 high-current outlets
are fed by noise filtration circuitry that does
not utilize coils and provides full, unimpeded
power for your amplifiers and powered sub-
woofers.
Other Features Enhance the
Functionality:
Although the MAX® 5300 functionality revolves
around noise filtration and power protection,
many other exciting features enhance the overall
entertainment experience, including:
As you read through the rest of this manual,
you’ll discover many more unique features.
As audiophiles, we care about the quality of
your listening and/or viewing experience.
Our goal is to:
• Provide clean pure power
• Protect your investment
• Enhance the pleasure you get from you’re
A/V system
Thank you for choosing Panamax for your
power quality needs. Please finish reading
the instructions, install your MAX® 5300 and
enjoy the full potential of your entertainment
system.
A backlit analog voltmeter indicates the AC
line voltage coming into your system.
A combination ON/OFF/Dimmer switch
controls the meter lighting.
An always-on, convenience outlet on the
front panel for temporary AC connections.
Sequential start-up and shut-down of your
system using an A/V receiver (or other
component) and the 12VDC trigger input.