Panasonic 5741G Laptop User Manual


 
Chapter 2 23
Main
The Main screen allows the user to set the system time and date as well as enable and disable boot options
and recovery.
NOTE: The screen above is for your reference only. Actual values may differ.
The table below describes the parameters in this screen.
Parameter Description Format/Option
System Time Sets the system time. The hours are displayed with 24-
hour format.
Format: HH:MM:SS
(hour:minute:second)
System Date Sets the system date. Format MM/DD/YYYY
(month/day/year)
Total Memory
Displays the total memory available.
N/A
Video Memory
Displays the available memory for Video.
N/A
Quiet Boot Quiet Boot replaces the customary technical messages
during POST with a more visually pleasing and
comfortable display (OEM Logo screen).
Option: Enabled or
Disabled
Network Boot Enables, disables the system boot from LAN (remote
server).
Option: Enabled or
Disabled
F12 Boot Menu Enables, disables Boot Menu during POST. Option: Enabled or Enabled
D2D Recovery Enables, disables D2D Recovery function. The function
allows the user to create a hidden partition on hard disc
drive to store operation system and restore the system
to factory defaults.
Option: Enabled or
Disabled
SATA Mode Control the mode in which the SATA controller should
operate.
Option: AHCI Mode or IDE
Mode
Display Mode Control the graphics display mode.
Note: Switchable Graphis is displayed as an option if
supported by the system.
Options: Integrated
Graphics, Discrete
Graphics or Switchable
Graphics
Item Specific Help
This is the help for the
hour field. Valid range
is from 0 to 23.
REDUCE
/INCREASE
: F5/F6
F1
ESC
Help
Exit
Select Item
Select Menu
Change Values
Select SubMenu
Enter
F9
F10
Setup Default
Save and Exit
[19:10:59]
[2/22/2010]
4096 MB
128 MB
[Enabled]
[Enabled]
[Disabled]
[Enabled]
[AHCI Mode]
[Switchable Graphics]
[19:10:59]
[2/22/2010]
4096 MB
128 MB
[Enabled]
[Enabled]
[Disabled]
[Enabled]
[AHCI Mode]
[Switchable Graphics]
System Time:
System Date:
Total Memory:
Video Memory:
Quiet Boot
Network Boot
F12 Boot Menu
D2D Recovery
SATA Mode
Display Mode
System Time:
System Date:
Total Memory:
Video Memory:
Quiet Boot
Network Boot
F12 Boot Menu
D2D Recovery
SATA Mode
Display Mode
F5/F6
InsydeH20 Setup Utility Rev. 3.5
Boot
Exit
Security
Information
Main