Filter
Top Products
ABJ1,2,3,4,5
2. Characteristics
3. Operating characteristics
Note: The O.P. differs between the 1.2 mm and 2.3 mm dia. installation hole types.
Mechanical life
(O.T.: Specified value)
Leaf lever, Long stroke type Min. 5×10
5
(at 60 cpm)
Wire leads (right & left side type) Min. 3×10
5
(at 60 cpm)
Other types Min. 10
6
(at 60 cpm)
Electrical life at rated load
(O.T.: max.)
AgNi alloy contact type Min. 3×10
4
(at 20 cpm)
AgNi alloy + Au clad contact type Min. 10
5
(at 20 cpm)
Insulation resistance Min. 100 MΩ (at 500 V DC insulation resistance meter)
Dielectric strength
Between non-continuous terminals
Between each terminal and other exposed metal parts
Between each terminal and ground
600 Vrms
1,500 Vrms
1,500 Vrms
Vibration resistance (Pin plunger type) 10 to 55 Hz at single amplitude of 0.75 mm (Contact opening max. 1 msec.)
Shock resistance (Pin plunger type) Min. 294 m/s
2
{30 G} (Contact opening max. 1 msec.)
Contact resistance (Initial)
Silver contact type
Dust protected type (IP50): Max. 50 mΩ
Immersion protected type (IP67): Max. 100 mΩ
(By voltage drop 1 A 6 to 8 V DC)
Gold clad contact type
Dust protected type (IP50): Max. 100 mΩ
Immersion protected type (IP67): Max. 150 mΩ
(By voltage drop 0.1 A 6 to 8 V DC)
Allowable operating speed (at no load) 1 to 500 mm/sec.
Max. operating cycle rate (at no load)
Other type: 120 cpm
Long stroke type: 60 cpm
Ambient temperature –40°C to +85°C
Unit weight Approx. 0.5 g (IP50 type)
Type of actuator
Operating force,
Max.
Release force,
Min
Pretravel,
Max. mm
Movement
differential,
Max. mm
Overtravel,
Min. mm
Operating position,
mm
Pin plunger
1.23N 0.15N
0.6 0.12 0.25
Mounting hole: 1.2
5.5±0.2
Mounting hole: 2.3
7.0±0.2
1.96N 0.25N
Hinge lever
0.39N 0.029N
3.0 0.5 0.5
Mounting hole: 1.2
6.8±1.0
Mounting hole: 2.3
8.3±1.0
0.64N 0.049N
Simulated roller lever
0.39N 0.029N
3.0 0.5 0.5
Mounting hole: 1.2
9.8±1.0
Mounting hole: 2.3
11.3±1.0
0.64N 0.049N
Roller lever
0.39N 0.029N
3.0 0.5 0.5
Mounting hole: 1.2
13.1 ±1.0
Mounting hole: 2.3
14.6±1.0
0.64N 0.049N
Leaf lever
0.98N 0.20N 6.0 1.0 2.5
Mounting hole: 3.0
16.0±2.0
1.27N 0.22N 2.6 0.5 1.4
Fixed pin type
10.7±0.7
Mounting hole: 3.0
16.25±0.7
1.76N 0.26N 2.6 0.5 1.4
Fixed pin type
10.7±0.7
Mounting hole: 3.0
16.25±0.7
1.27N 0.29N 6.0 1.0 2.5
Mounting hole: 3.0
16.0±2.0
Long stroke type 2.45N 0.20N — 0.5 2.0 2.5±0.4
All Rights Reserved © C
OPYRIGHT Panasonic Electric Works Co., Ltd.