Filter
Top Products
AJ8R
8
DIMENSIONS
Double pole (ON-OFF)
24
13
56
Suitable connector: CT connector
32
1.260
16°
±4°
8.6
.339
16
.630
0.8
.031
13.5
.531
10.6
.417
4.4
.173
2
.079
1.75
φ
.069
φ
15
.591
29.8
±0.3
1.173
±.012
6.35
.250
19.7
.776
25
.984
22
.866
+0
−0.2
+0
−.008
18.3
.720
(11.3)
(.445)
21.7
±0.25
.854
±.010
Edge
The opening radius from when
the panel was processed should
be on the front side of the panel
Opening radius
Remarks: 1. The external dimensions and mounting dimensions for the single pole, single throw
type and the single pole, double throw type are the same as those for the double pole,
single throw type indicated above.
2. The figures show the double pole, single throw (ON-OFF) type as an example.
The contact terminals are 1, 2, 3, and 4.
In the case of the single pole, single throw (ON-OFF) type, the contact terminals are 1
and 2.
In the case of the single pole, double throw (ON-ON) type, the contact terminals are
1, 2, and 4.
There are no other terminals.
Refer to the internal wiring diagram.
3. The coil is a polarized coil; coil terminal 5 is positive and coil terminal 6 is negative.
Wiring diagram(Bottom view)
Single pole (ON-OFF)
Single pole (ON-ON)
Double pole (ON-OFF)
ON (set): 1-2
2
56
1
Reset:
Set:
1-4 closed
1-2 closed
24
56
1
2
56
4
13
ON (set): 1-2 closed
3-4 closed
Diagram of recommended locations for
panel mounting holes
Remark: Contact us if you are considering
using a panel of other than the rec-
ommended size and shape.
Panel thickness X Y
1 to less than 1.8
.039 to .071
30.4
1.197
22.0
.866
1.8 to 2.3
.071 to .091
31.1
1.224
22.0
.866
X
Y
R Max. 01
+0
–0.1
+0.1
–0
+0
–.004
+.004
–0
+0
–0.1
+0.1
–0
+0
–.004
+.004
–0
03/2005