Filter
Top Products
AJ9 (J9)
CONSTRUCTION
POWER ROCKER SWITCH
AJ9 (J9)
SWITCHES
VDE
AJ9 switch snap-in mounting type
AJ9 switch screw mounting type
FEATURES
1. Power rocker switches for safety
requirements.
• All versions comply with ClassII
EN61058-1 insulation grade.
Insulation distance: 8mm Min.
Contact gap: 3mm Min.
• International Standard-approved
status
2. High inrush current resistance is
ideal for office automation equipment.
3. Eight standard actuator colors
White, black, red, dark gray, light gray,
blue, green, yellow
PRECAUTIONS WHEN
USING CADMIUM-FREE
CONTACT TYPE
Models with cadmium-free contacts have
been introduced in order to reduce
environmentally harmful substances. (“F”
is affixed to the end of the part number.)
We ask customers who are currently
using products with cadmium-containing
contacts (no “F” at the end of the part
number) to please make the switch to
models with cadmium-free contacts.
When switching, operating life may differ
depending on the load. Please be sure to
verify this by conducting an evaluation
using actual equipment.
RoHS Directive compatibility information
http://www.nais-e.com/
Already approved
AJ9 switch UL, CSA, VDE, SEMKO
Type Inrush Contact rating
Expected
life
AJ9 100A 16A 250V AC Min.10
4
Actuator
Case
Snap-in Clip
Dustproof construction
The EN60950 (intended for office automation
equipment) conforms with a 3mm gap.
When directly opening or closing the primary power
supply side, a contact gap of at least 3mm is required
in order to ensure safety.
Contact gap (more than 3mm)
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.