Filter
Top Products
16
Useful Information
4. If you are not satisfied with the speed test result, connect the terminal
to a different wall outlet and repeat the test.
Note
• The fastest and slowest speeds are displayed by the indicators
alternatively for about 6 seconds. If there is little difference between the
fastest and slowest speeds, they will be displayed as the same speed.
• At least one indicator (“Good” network speed) must be lit in order to use
the terminal.
• If you are not satisfied with the speed test result and have tried
connecting the terminal to different wall outlets, refer to the
troubleshooting section (see page 19).
• If the electrical conditions in your home change, network speed may also
change.
Once you are satisfied with the terminal’s speed test result, you are ready to
connect each adaptor to a network device (broadband router, hub,
computer, network printer, network camera, etc.; see page 14).
*1 Approximate data transmission speed when transmitting data using the UDP
protocol.
BL-PA300A_OI.book Page 16 Wednesday, August 6, 2008 9:59 AM