Filter
Top Products
12
Getting Started
Description of Parts
Switching to the Tablet mode
A
Lift up the display so it stands perpendicular to the body.
B
Slide and hold the display release latch (A), and rotate the display
clockwise until it clicks.
Attaching the stylus to the computer
Use the tether to attach the stylus to the computer so you will not lose it.
There are holes (A) to attach it.
y
For model with digitizer, the tether and pen are already attached to the
computer at purchase.
Attaching the hand strap and the shoulder strap
Attach the hand strap to any two of the corners (A) using the screws.
You can connect the shoulder strap (B) to the hand strap.
(The illustration is an example.)
CAUTION
z
Do not use the strap to carry a heavier weight than the computer. Other-
wise the strap may become loose by itself.
z
Do not use the strap if it becomes worn or damaged.
C
Close as the display faces up and fi x it using the latch (B).