Filter
Top Products
25
SD Memory Card/MultiMedia Card
If the card is set for [Use when starting computer]
When the following screen appears…
An SD memory card that has been initialized (SD Card Setup) can be used as described below.
<If [Leave set] was selected in step 4 for “Initialization (SD Card Setup)”>
Insert the SD memory card.
<If [Set and eject] was selected in step 4 for “Initialization (SD Card Setup)”>
Insert the SD memory card, then eject it.
You can also start your computer by entering the Supervisor Password or User Password.
If [Leave set] was selected in step 4 and an SD memory card is already inserted, the above password input
screen does not appear.
An SD memory card with the above settings can be used as an ordinary memory card in other devices as well.
When using the SD memory card in another device, do not delete the [Private] folder. Doing so will cancel the
[Use when logging on to Windows].
After completing your selections, select [Next]
Select [Restart the computer after entering settings], then select [Finish]
<This is done only if you select [Use when logging on to Windows] in step 4 >
Set the logon user name and password registered in Windows
Enter the user name, then press Tab
Enter the password, then press Tab
Reenter the password entered in step , then select [OK]
Select [Yes] on the confirmation screen
<This is done only if you select [Use when starting computer] in step 4 >
Enter the Supervisor Password
Enter the Supervisor Password, then press Tab
<This is done only if the Supervisor Password has not been set in the Setup Utility.>
Reenter the Supervisor Password entered in step
Select [OK]
Select [Yes] on the confirmation screen
CAUTION
Using a SD Memory Card with the Security Function
NOTE
5
6
7
8