Panasonic DP-6020 Fax Machine User Manual


 
Customizing Your Machine
194
Fax Parameter Table
151 Email Header Format All Selecting the header information to print when an email is received.
(Normally used for Troubleshooting. It shows the path of the email
transmission before arriving at your machine.)
*Subject/
From/To
Off
152 Sub-address Routing *Invalid Selecting whether to automatically route a received fax or email using
ITU-T sub-address.
Valid
153 TSI Routing *Invalid Selecting whether to route a received fax to a telephone number or an
email address preprogrammed in the Address Book using the
originating fax’s Numeric ID (TSI frame information).
Valid
154 Routing Header Format *Originator Selecting the type of email header to be included in the "From" field of
each routed fax.
Originator : The originating fax machine’s TSI will appear in the
"From" field of the routed email.
Relay Station : The routing station’s email address will appear in the
"From" field of the routed email.
Relay
Station
155 Print Routed Document *Inc. only Selecting whether a received fax to be routed is always printed or only
when the routing operation fails.
Always
156 Print Forward Document *Inc. only Selecting whether a memory received fax or email to be forwarded is
always printed or only when forwarding is incomplete.
Always
157 Transaction Journal *Invalid Selecting whether the machine sends a transaction journal to the
pre-programmed email address.
Valid
158 PC Remote Update *Invalid Selecting whether the machine will accept commands from an email
application, to:
(a) Program the Internet Parameters
(b) Program the Address Book
(c) Allow retrieval of the Journal
Valid
160 Default Domain Invalid Selecting whether the machine accepts to insert the Default Domain
when entering Manual Number Dialing.
*Valid
162 TIFF Viewer URL None Selecting whether to include the URL address in the email message
body.
*English
English+
Japanese
163 Routing Header *Off Selecting whether to add the Header Print information of the Routing
Station on the top edge of each routed page.
On
164 IFax XMT Header
(Email only)
*Included Selecting whether to include the header when sending a document to an
addressee in the same Domain as specified in the Default Domain
parameter. (This is useful when using the machine to scan documents
back to your PC)
Note: When sending to a Domain other than as specified in the
Default Domain parameter, the header will be included
regardless of the selection.
Not included
* = Factory default setting
No. Parameter Setting Comments