Panasonic DP-C354 Copier User Manual


 
38
Chapter 1 Basic Menu Features
Completion Notice
If Completion Notice is set, you will be notified on your computer when copying is completed.
zBefore using this function, install the Panasonic Document Management System and PCL Printer Driver,
and then configure each software.
zTo register the IP Address of your computer, refer to Network Scanner Settings (Option) and Completion
Notice in the Operating Instructions (For Setting Up) of provided booklet.
1
Place original(s).
zRefer to Placing Originals (Copy) in the
Operating Instructions (For Basic
Operations) of provided booklet.
2
Press the Copy key if the machine is
set to other function mode.
3
Select the copy features if necessary.
4
Select “Completion Notice”.
5
Select an index tab or “Favorites” to
display the registered computers.
6
Select a designated computer, and
then select “OK”.
7
Enter the desired number of copies.
8
Press the Start key.
A completion notice will be sent to the
specified computer when copying is
completed.
zWhen copying from the Platen Glass, place
the next original, and follow the instructions
described on the touch panel display.
zAfter finishing copying, press the Reset key
to return to the initial screen of the current
active mode.