Panasonic DP-C406 Printer User Manual


 
27
Chapter 2 SD Print Settings
Quality Adjusting
When printing directly from the SD Memory Card or USB Flash Memory, you can adjust the image
quality.
The following five quality adjustments are available.
Contrast
Brightness
Saturation
•Tint
Color Balance
zYou can adjust the image quality of JPEG files only.
zThe default settings can be changed with the Function Parameter “30 SD Print Settings” (Printer Settings >
General User Mode). Refer to Printer Settings in the Operating Instructions (For Function Parameters) of
provided CD-ROM.
zUnder the following situations, the Quality settings return to the standard settings.
- If the Reset key is pressed.
- If Auto Reset Time interval has lapsed (default = 1 min).
- If the power is turned OFF.
1
Select “More Settings”.
zTo display “More Settings”, refer to steps 1
to 6 of Printing from SD Memory Card
(see page 11) or steps 1 to 6 of Printing
from USB Flash Memory (see page 14).
2
Select “Quality Adj.”.
Ex:When “More Settings” is selected in
Thumbnail/Index Print” tab.
3
Select the desired quality setting and
adjust the setting, and then select
OK”.
Contrast (see page 29)
Brightness (see page 30)
Saturation (see page 31)
Tint (see page 32)
Color Balance (see page 33)
Continued on the next page...