Filter
Top Products
46
Cleaning the Unit
4
Pull the exit document stopper
towards you and use your hand to pull
the front door release towards you.
Then open the front door completely.
5
Use the accessory roller cleaning
paper (KV-SS03) to remove the dirt
from the surfaces of all rollers.
•
When wiping off the dirt, hold the rollers
to prevent them from rotating. Wipe the
rollers completely from one end to the
other. Be sure to wipe in the directions of
the arrows shown on the diagram to the
right.
6
Close the front door.
•
Push both sides of the front door down
gently until it clicks into place.
• Do not close the front door holding the
hopper extension tray.
Front door release
(Inside the front door )
Front door release
Front door
Front door
Exit document stopper
Hopper extension
tray
• The rollers to be cleaned are shaded.
• Wipe in the direction of the arrows.
Rollers
Sensor roller
Conveyor rollers