Filter
Top Products
Features Summary
50
How to set menu options
1. Press .
2. Press or until the desired feature
is displayed.
3. Press or until the desired setting
is displayed.
4. Press .
5. Press .
MENU
SET
MENU
Note:
●
Step 3 may be slightly different
depending on the feature.
●
See page 49 for more details.
Basic features!
Programming table
Code
#01
To set the date and time.
SET DATE & TIME
PRESS SET
mm/dd/yy
hh:mm
(2 digits for
each entry)
See page 15 for details.
See page 16 for details.
See page 18 for details.
“ERROR”: The sending report will
be printed only when fax
transmission fails.
“ON”: The sending report will be
printed out after every transmission.
#02
To set your logo.
YOUR LOGO
PRESS SET
(Up to 30
characters)
Display & Feature Settings How the unit operates
#03
To set your facsimile telephone
number.
YOUR FAX NO.
PRESS SET
(Up to 20
digits)
#04
To print and check the sending
report for fax transmission results
(p. 31).
SENDING REPORT
MODE=ERROR [±]
ERROR
ON
OFF
(The default setting is in bold type.)
This setting is also available after
activating FAX ONLY mode (p. 39).
If you are using the unit with an
answering machine, set to “5
EXT.TAM” (p. 42).
#06
To change the number of rings
before the unit answers a call
in FAX ONLY mode
FAX RING COUNT
RINGS=3 [±]
1, 2, 3, 4,
5 EXT.TAM
The following method of programming is applied except features #01, #02 and #03. For features
#01, #02 and #03, refer to the programming table below.